Seamaster Paint

PLATINUM

Matt Wall Finish

Seamaster Platinum Matt Luxury Wall Finish is a high quality styrene-acrylic emulsion paint formulated for interior wall surfaces. This product provides solid matt finish with a good protection to the concrete against alkaline attack. The product has been tested and certified to SIRIM Malaysia Standard MS134 : 1989 (Cert. No : PS010704).

Product Specifications
Physical Characteristics
Ingredient :
  • Styrene-acrylic Polymer Dispersion
  • Pigments
  • Mineral Extenders
  • Additives
Density : 1.35 – 1.45 (kg/litre)
Solid : Approximately 50 %
Coverage : 10 – 13 m² /litre
Colours : Refer to colour card
Gloss : Matt
:
Properties
Dry Film Thickness : 25 – 30 microns per coat
Drying Time : Touch dry : ≤ 15 minutes
Hard dry : ≤ 30 minutes
Recoating Interval : 2 hours
Theoretical Coverage : 10 – 12m² / litre
No. of Coats : Minimum 2 coats
Application Method
Method of Application :
Brush and roller or airless spray.		  
Product Preparation :
Ready for use after thoroughly stirring. However, if thinning
is required, not more than 5 % of water may be added for
the first coat. For best result, thinning is not recommended
for the subsequent coats.
Surface Preparation
New Masonry Surface :

It is crucial that ample time is allowed for the concrete / plaster surfaces to dry out. High moisture content is a common cause for premature paint failures, such as blistering, discolouration, etc.

Concrete / plaster is alkaline in nature and together with the presence of salts and moisture may cause paint systems to fail prematurely.

Masonry surfaces must be reasonably dry and free from oil / grease and other contaminants before an appropriate alkali resistance sealer is applied.

Old Unpainted / Previously Painted Masonry Surface:
Surface must be dry and free from any structural damaged and cracks. Wash the surface to remove any stains, debris and powderiness before application with 8800 Platinum Matt Luxury Wall Finish.

Storage Condition
Air tight, store under dry and cool condition.

Low Odour
Excellent
Hiding Power
Low VOC

Main Product Feature

  • Matt finish
  • Washable
  • Smoother finish
  • Excellent colour fastness
  • Excellent hiding power
  • Dirt-resistant Formula
  • Excellent adhesion and durability
  • Fungus and algae-resistant
  • Certified to SIRIM malaysia standard MS134 : 1989