High Gloss Finish
Seamaster Synlac Synthetic High Gloss Finish is oil modified alkyd enamel paint, which provides excellent gloss. This product is also formulated to provide excellent durability, colourfastness and fungus resistant. 9900 Synlac is supply in various attractive colours; it is easy to apply to give a good glossy smooth surface. This product has been tested and certified to SIRIM Malaysia Standard MS 1.25: 1985 (Certificate No.: PS010708).
As a finishing coat for the decoration and protection of the interior and exterior of wood or metal surfaces.
|Density :||0.90 – 1.30 (kg/litre)|
|Solid :||Approximately 60 %|
|Coverage :||12 - 14 m² /litre|
|Colours :||Refer to colour card|
|Gloss :||High Gloss|
|Dry Film Thickness :||25 - 30 microns per coat|
|Drying Time :||Touch dry : ≤ 3 hour
Hard dry : ≤ 6 hours
|Recoating Intervall :||Overnight|
|Theoretical Coverage :||12 - 14 m² / litre|
|No. of Coats :||Minimum 2 coats|
|Method of Application :
Brush and roller or spray application..
|Product Preparation :
Ready for use after thoroughly stirring. However, if thinning is required, not more than 10% of mineral turpentine may be added for brush and roller application; and for spray application up to 15 - 20% of mineral turpentine may be added.
|Wood Surface :|
The woodwork must be dry and free from dirt and other contaminants. Smoothen the surface by sanding and dust off before applying the paint system.
Metal Surface :
Previously Painted Surface :
Main Product Feature
- Excellent gloss
- Excellent durability
- Excellent adhesion
- Excellent levelling
- Excellent fungus resistance
- Certified to SIRIM Malaysia Standard MS125: 1995