Seamaster Paint Manufacturing Bhd. is the first paint manufacturer introducing Colour Palette Protective Coating Computerised Tinting System. This anti-corrosive product range is specially formulated to meet the increasing demand from industrial needs. It is suitable for building construction, oil refineries, pipelines, marine industries, chemical processing equipment, industrial flooring etc. It provides an excellent protection to metal, concrete and surfaces that are exposed to severe weathering condition, chemical attacks, corrosion and erosion, humid environment etc.

 


With Seamaster Colour Palette Protective Coating Tinting System, the entire process is completed in less than 3 minutes


----------------------------------------------------------------------------------------------------------------------------------------

Seamaster Colour Palette Protective Coating Computerized Tinting System includes products range like :-

1) 9300 Epoxy Enamel C/W Hardener
2) 4400 Nitrocellulose Lacquer Enamel
3) 9600 Syntalux 2K Protective & Architectural Finish C/W Hardener

Seamaster 9300 Epoxy Enamel is a high performance two pack epoxy resin based paint cured by polyamide activator. It has excellent protection against fresh and salt water, abrasion resistance, chemical resistance and resistant to crude and heavy oils. This product is specially formulated for industrial use and provides excellent heavy duty protection to metal, steel structure, floor and cement surfaces that are exposed to severe weathering condition.

As a finishing coat of the epoxy system. Suitable for use on steel and cement surfaces where high degree of chemical, oil and abrasion resistance is required.

Seamaster 4400 Nitrocellulose Lacquer Enamel is an industrial fast air dry lacquer suitable for application over primed wood or metal substrates. It is easy to apply, easy to repair, and is recoatable with minimum preparation.

This product is especially used in the wood furniture industry. However, it may also be used for metal surfaces.

Seamaster 9600 Syntalux 2K Protective and Architectural Finish is a two component polyurethane protective and architectural coating system. It is a high quality solvent-based coating and has excellent severe weather resistant properties. It can be applied to various kinds of substrates like masonry, cement, metal, wood, ABS plastic, MDF board and plywood etc.

It is suitable for interior and exterior use. For building exterior, shopping mall, factories where abrasive resistance, weather resistance and scratch resistance are required.

  • Outstanding resistance to severe weathering
  • High abrasion resistance
  • Easy to Clean
  • Excellent solvent and chemical resistance
  • Excellent flow and leveling
  • Excellent algae and fungus resistance

 

 

 


---------------------------------------------------------------------------------------------------------------------------------------------------

 

SABAH

1) Lee Tat Lee Enterprise Sdn. Bhd.
Lot 11, 12, 13, 30 & 31, Phase 1, H.S.K. Industrial Centre,
Mile 5, Jalan Penampang,
88300 Kota Kinabalu,
Sabah.
Tel : +6088-717557

2) Towering Hardware Sdn.Bhd.
Block C,Ground Floor,
Lot No 5,Jalan Kiansom,Inanam,
P.O.Box 20298,
88759 Luyang,
Kota Kinabalu,Sabah.
Tel: +6088-424551

3) Pacific Mega Trading
Lot 2, Ground Floor,
Putatan New Township,
Putatan,
88200 Kota Kinabalu, Sabah
Tel : +6088-773787

4) Winsun Enterprise
Mdld 3240, Tingkat 1,
Dam Industries Centre,
Jalan Dam P.O.Box 60566,
91114 Lahad Datu,
Sabah.
Tel: +6089-882286

5) CS Trading
236A, Leeka Light Industrial,
Mile 2, Jln Apas,
P.O.Box No.60577,
91015 Tawau, Sabah.
Tel: +6089-911863

 

 


 


Select Locations :-

JOHOR
KEDAH
KUALA LUMPUR
NEGERI SEMBILAN
PENANG
SELANGOR
SABAH

 

 

 

 

 

back to SEAMASTER  PAINT homepage send Enquiry contact SEAMASTER PAINT back to SEAMASTER  PAINT homepage another by UNEE d e s i g n